|
|
Post by otonedog on Mar 9, 2010 22:32:24 GMT -5
Heard any rumors of us being off the rest of the week?
|
|
|
|
Post by kkenn on Mar 9, 2010 22:52:08 GMT -5
|
|
|
|
Post by JoePieper on Mar 10, 2010 0:36:38 GMT -5
A crew body went 4.5. We went 6 hours on B crew. Hope to get a call tomorrow ;D
|
|
|
|
Post by TonyV on Mar 10, 2010 3:54:52 GMT -5
U-trim on 10 hours the rest of the week.
|
|
|
|
Post by ktpschd on Mar 10, 2010 6:22:38 GMT -5
Not sure what it means, but...was told everything will be coming down chassis one sometime today...
|
|
|
|
Post by JoePieper on Mar 10, 2010 7:59:09 GMT -5
Do the Us go down Chassis 1 or 2
|
|
|
|
Post by ktpelec on Mar 10, 2010 8:09:59 GMT -5
U's can only be built on Chassis #2, it is physically impossible to route those units to Chassis #1. I understand that we are recieving 84 diesel motors today and 84 tomorrow to keep the gaps on Chassis to a minimum. These motors are reported to be free of defects and will be tested extensively. U trim dept. will continue to run 10 hrs.
|
|
|
|
Post by ktpgal89 on Mar 10, 2010 8:46:41 GMT -5
C Crew paint ran the whole 8 hours today...it was a confusing mess trying not to jam the stacker with too many U's and shut the system down. Will be glad to get the diesels back!!
|
|
|
|
Post by ScottR@KTP on Mar 10, 2010 10:28:44 GMT -5
Box line body ran 6.5 last night, but we didn't build many boxes. With the mix this week, there isn't much for us to do...but just sit around.  |
|
|
|
Post by kentucky250s on Mar 10, 2010 12:48:24 GMT -5
super duty trim left at 1130 today
|
|
|
|
Post by ScottR@KTP on Mar 10, 2010 12:58:21 GMT -5
Good news...no way we can work long building boxes we don't need. Need to be home by 9:30 to watch the Cards! |
|
|
|
Post by brizzel on Mar 10, 2010 13:26:46 GMT -5
GO CARDS!!!
|
|
|
|
Post by sofreshsoclean on Mar 10, 2010 17:56:38 GMT -5
C crew paint worked pretty much the whole night even though the stacker was full so where does the trucks go when the other side has been gone so long?Needs to be some accounting for this.No one is suppose to be up there pushing right(OSHA)  ? GO CARDS!!! |
|
|
|
Post by ktpelec on Mar 10, 2010 18:04:31 GMT -5
The Stacker is not even close to being full. Body shop is not building "Diesel" cabs, the largest percentage of vehicles we build. U's do not go into the Stacker system, they have thier own "Lane Bank" that feeds U Trim dept. Everyone went home early, except for U Trim, it can only deliver approximatly 21 jobs per hour to Chassis #2. The "mix" is very skewed at this point, until diesel engines get back to full production.
|
|
|
|
Post by Ironman2301 on Mar 10, 2010 20:58:34 GMT -5
A-crew body went 7 hours today!
|
|
|
|
Post by inspect96 on Mar 11, 2010 1:14:24 GMT -5
8 hrs in u trim tonight
|
|
|
|
Post by kentucky250s on Mar 11, 2010 12:35:42 GMT -5
super duty trim went 4hrs today
|
|
|
|
Post by Ironman2301 on Mar 11, 2010 13:58:00 GMT -5
A-crew body went 5.2 today! Hope we go short tomorrow so I can get home and watch the CATS!!
|
|
|
|
Post by ScottR@KTP on Mar 11, 2010 14:00:03 GMT -5
Nice...enjoy your short days guys and gals. |
|
?